Vision Controls Cam SS Version 5.01 Manual de instrucciones descargar pdf (Pagina 57)

Installing In-Sight

5000 Series Vision Sensors

5.2.3 24VDC Breakout Connector and Cable Specifications

The 24VDC Breakout connector provides access to power, serial communications, trigger

and high-speed outputs. The Breakout cable is not terminated (

Table 5-8).

1. If hardware handshaking is required, an I/O Expansion module must be used.

Table 5-8: 24VDC Breakout Connector Cable Pin-Out

Pin# Signal Name Wire Color

1 Power, +24 VDC White/Green

2 Trigger + Green

3 Trigger - White/Orange

4 High-Speed Out 0 Blue

5 High-Speed Out 1 White/Blue

RS-232 Receive (RxD)

Orange

RS-232 Transmit (TxD)

White/Brown

8 Ground Brown

NOTE:

Unused bare wires can be clipped short or tied back using a tie made from non-conductive

material. Keep all bare wires separated from the +24VDC (White/Green) wire.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 75 76

Sin comentarios

Vision Controls Cam SS Version 5.01 Manual de instrucciones Pagina 57