Vision Controls Cam SS Version 5.01 Manual de instrucciones descargar pdf (Pagina 32)

Installing the Sensor

3. Optionally, connect the DB9 male connector of an RS-232 serial cable to the corresponding

DB9 female connector on the Expansion Module (

Figure 3-7).

4. Plug the I/O Module Cable’s DB15 male connector into the corresponding female connector

on the Expansion Module.

Figure 3-7: Connecting the I/O Cable and Serial Cable

5. Plug the M12 connector of the I/O Module Cable into the sensor’s 24VDC connector (Figure

3-8).

Figure 3-8: Connecting the Expansion Module to the Sensor

6. Plug wire leads from a 24VDC supply for the +24V power and ground into the 2 pin terminal

plug labeled “Camera Power” on the Expansion Module (

Figure 3-9).

NOTE:

The I/O Module’s standard components do not include an I/O module cable; it must be

purchased separately.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 75 76

Sin comentarios

Vision Controls Cam SS Version 5.01 Manual de instrucciones Pagina 32